AUTOOL ATF705 ATF dynamic oil exchange station | 220V | 20L tank | 470 x 440 x 1060 mm | 5" IPS screen

AUTOOL ATF705 ATF dynamic oil exchange station is an uncompromising working tool from GGM Tools, designed for the most demanding mechanics and professional car services. Equipped with an impressive set of specialized connectors, the station is compatible with all types of automatic transmissions manufactured in Europe, America, and Japan. A key distinguishing feature of the AUTOOL ATF705 ATF dynamic oil exchange station is its ability to perform a complete cleaning and precise filling of the system with new oil in just 20 minutes, achieving a fluid exchange rate in the gearbox, converter, and radiator of over 90%.

AUTOOL ATF705 ATF dynamic oil exchange station – Advantages and design innovations:

• Automatic flow direction identification: The system intelligently detects the direction of oil inlet and outlet without the need to manually check the hoses, which eliminates the risk of operator error.
• Fully automatic fluid exchange process: The device independently carries out the procedure of extracting old and introducing new ATF oil, controlling the entire process using built-in sensors.
• High precision of equal exchange (Equal Exchange): The advanced monitoring system ensures that the volume of fresh oil injected is identical to the amount of used oil, maintaining a perfect balance in the system.
• Cyclic cleaning function: The automatic closed loop effectively removes deposits, sludge, and metallic impurities, significantly improving the efficiency of the subsequent fluid exchange.
• Stable 220V mains power supply: The device is adapted to work with standard 220V mains voltage, which ensures stable and uninterrupted operation of pumps and electronic systems in workshop conditions.
• Operation without dismantling components: Connecting directly to the transmission radiator hoses using professional quick-connect couplers shortens working time and facilitates service.
• 5-inch HD IPS screen: The high-resolution display shows the current steps of the procedure and operating parameters in real time, ensuring full control over the process.
• Electric pressure regulation: Ability to adjust the pressure and oil flow rate to meet the technical requirements of specific vehicle makes and models.
• Visual oil condition monitoring: Illuminated inspection windows allow you to monitor the color, purity, and wear condition of the old and new gear oil in real time.

AUTOOL ATF705 ATF dynamic oil exchange station – Detailed operating instructions and work stages:

Stage 1 – Preparing the device and vehicle for the procedure:
Connect the device's power cord to a 220V electrical network. Raise the car on a lift so that the drive wheels are at least 20 cm above the ground, engage the parking brake, and secure the wheels with chocks. Disconnect the oil lines connecting the gearbox with the radiator, select the appropriate adapters from the kit, and plug in the station's hoses. Start the engine, check the tightness of connections, and then turn on the main power of the station.

Stage 2 – Cyclic cleaning of the transmission system:
Introduce the cleaning agent directly through the gearbox dipstick hole or add it to the new oil tank in the station (minimum 1 liter) and use the "Add new oil" function. Select the "Cyclic cleaning" program and set the time (recommended minimum 20 minutes). During the countdown, the vehicle engine must be running. The operator should sequentially change gears, stopping at each gear ratio for 1 minute. In the highest gear, gently increase the revs, simulating a speed above 60 km/h, to thoroughly flush the entire hydraulic labyrinth of the gearbox.

Stage 3 – Procedure of equal exchange of old oil for new:
Pour fresh ATF oil into the new oil inlet on the station. Select the "Equal exchange" function and set the required volume (it is recommended to set a value 2 liters higher than the nominal capacity of the given gearbox). Start the car engine and confirm the start on the IPS screen. The station will automatically start a precise dynamic exchange. During this process, change gears sequentially again, holding each gear for 1 minute (including a driving simulation above 60 km/h in the highest gear).

Stage 4 – Recovery, emptying tanks, and maintenance:
To recover the remaining old fluid, select "Recover used oil" and define the volume. In order to dump unused clean oil, disconnect the station from the car and start the "Drain new oil" function, which will transfer the fluid to the used oil tank. Emptying the main waste oil tank is done by opening the back door of the station, releasing the fastening strap, and disconnecting the drain hose. After finishing work, clean the tank and reset the electronic scale with the "one-click zero" calibration function to maintain the highest measurement precision.

AUTOOL ATF705 ATF dynamic oil exchange station – Technical specifications:

• Brand: AUTOOL | Model: ATF705
• Operating power supply: AC 220V / 50Hz
• Maximum device power: less than 150W
• Pressure gauge range: 10 kg/cm²
• Outlet hose length: 2.5 m
• Return hose length: 2.5 m
• Oil tank capacity: 20 liters
• Working environment temperature: -10°C to +40°C
• Generated noise level: less than 70dB
• Overall product dimensions: 470 x 440 x 1060 mm
• Allowable relative humidity: less than 85%
• Distributor: GGM Tools

AUTOOL ATF705 ATF dynamic oil exchange station is the highest quality of work from GGM Tools!